AMS TSL2572 Element
The TSL2572 element is used to measure light levels. This element is for using the AMS TSL2572 ambient light sensor.
The TSL2572 is a sensor element that can be imported into the Element Toolbox through the Add Elementbutton located in the toolbox from the Embedded tab. NXP Rapid IoT projects have this element imported by default.
The following properties can be changed for the TSL2572 element:
The name of the element.
I2C Driver Instance
The I2C bus used to communicate with the sensor.
The I2C address the element sends data to.
The following triggers are available to execute events from within the TSL2572 element:
Execute an event when the source element connected to the TSL2572 triggers.
Ambient Light Read
Execute an event when ambient light data is read.
The following abilities are available for the TSL2572 element when its source element triggers:
Trigger the element(s) that follow the TSL2572 element.
Enable the sensor.
Disable the sensor.
Set Enabled State
Set the state of the sensor: enabled or disabled.
Read Ambient Light
Read the sensor’s ambient light data (in lux).