Analog Devices ADT7410 Element

The ADT7410 element is used to read ambient temperature. This element is for using the Analog Devices ADT7410 temperature sensor.

The ADT7410 is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the ADT7410 element:

Name

The name of the element.

I2C Address

The I2C Address of the element.

Triggers

The following triggers are available to execute events from within the ADT7410 element:

Triggered

Execute an event when the source element connected to the ADT7410 triggers.

Temperature Read

Execute an event when the temperature is read.

Abilities

The following abilities are available for the ADT7410 element when its source element triggers:

Trigger

Trigger the element(s) that follow the ADT7410 element.

Read Temperature

Read the ambient temperature in degrees Celsius.