Bosch BME680 Element

The BME680 element is used to measure environmental conditions, including gas, barometric pressure, temperature, and humidity. This element is for using the Bosch BME680 environmental sensor, which is featured on the RSL10 Sensor Development Kit (RSL10-SENSE-GEVK).

The BME680 is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab. RSL10-SENSE-GEVK projects have this element imported by default.

Properties

The following properties can be changed for the BME680 element:

Name

The name of the element.

I2C Driver Instance

The I2C bus used to communicate with the sensor.

I2C Address

The I2C address the element sends data to.

Triggers

The following triggers are available to execute events from within the BME680 element:

Triggered

Execute an event when the source element connected to the BME680 triggers.

Temperature Read

Execute an event when temperature data is read.

Humidity Read

Execute an event when humidity data is read.

Pressure Read

Execute an event when pressure data is read.

Abilities

The following abilities are available for the BME680 element when its source element triggers:

Trigger

Trigger the element(s) that follow the BME680 element.

Read Temperature (°C)

Read the sensor’s temperature data in Celsius.

Read Humidity (%rh)

Read the sensor’s humidity data in relative humidity percentage.

Read Pressure (Pa)

Read the sensor’s pressure data in pascals.