MikroElektronika IrThermo Click Element
The IrThermo click element is used to measure infrared temperature. This element is for using the MikroElektronika IrThermo Click board.
The IrThermo click is a sensor element that can be imported into the Element Toolbox through the Add Elementbutton located in the toolbox from the Embedded tab.
The following properties can be changed for the IrThermo click element:
The name of the element.
I2C Driver Instance
The I2C bus used to communicate with the board.
The I2C address the element sends data to.
The following triggers are available to execute events from within the IrThermo click element:
Execute an event when the source element connected to the IrThermo click triggers.
Execute an event when temperature data is read.
The following abilities are available for the IrThermo click element when its source element triggers:
Trigger the element(s) that follow the IrThermo click element.
Read the temperature data.