MikroElektronika Relay Click Element

The relay click element is used to control the flow of power between terminals via two mini-relays. This element is for using the MikroElektronika Relay Click board.

The relay click is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Element Icon
Relay Click Element

Properties

The following properties can be changed for the relay click element:

Name

The name of the element.

GPIO Driver Instance

The GPIO driver instance number to use.

Relay 1 GPIO Pin

The GPIO pin the element is connected to for relay 1 on the click board.

Relay 1 GPIO Pin

The GPIO pin the element is connected to for relay 2 on the click board.

Triggers

The following triggers are available to execute events from within the relay click element:

Triggered

Execute an event when the source element connected to the relay click triggers.

Relay 1 Set On

Execute an event when relay 1 is set to on.

Relay 1 Set Off

Execute an event when relay 1 is set to off.

Relay 2 Set On

Execute an event when relay 2 is set to on.

Relay 2 Set Off

Execute an event when relay 2 is set to off.

Relay 1 Toggled

Execute an event when the state of relay 1 is toggled.

Relay 2 Toggled

Execute an event when the state of relay 2 is toggled.

Both Relays Set On

Execute an event when both relays are set to on.

Both Relays Set Off

Execute an event when both relays are set to off.

Both Relays Toggled

Execute an event when the state of both relays are toggled.

Abilities

The following abilities are available for the relay click element when its source element triggers:

Trigger

Trigger the element(s) that follow the relay click element.

Set Relay 1 On

Set relay 1 to on. This means that current is flowing between its two terminals.

Set Relay 1 Off

Set relay 1 to off.

Set Relay 2 On

Set relay 2 to on. This means that current is flowing between its two terminals.

Set Relay 2 Off

Set relay 2 to off.

Toggle Relay 1

Toggle the state of relay 1 between on and off.

Toggle Relay 2

Toggle the state of relay 2 between on and off.

Set Both Relays On

Set both relays to on.

Set Both Relays Off

Set both relays to off.

Toggle Both Relays

Toggle the state of both relays between on and off.