RGB LED Element

The RGB LED element is used to turn the hardware’s red, green, and blue LEDs on or off. This element is only available within Rapid IoT projects.

The RGB LED element is located in the Element Toolbox within Studio’s Embedded tab.

Properties

The following properties can be changed for the RGB LED element:

Name

The name of the element.

Triggers

The following triggers are available to execute events from within the RGB LED element:

Triggered

Execute an event when the source element connected to the RGB LED triggers.

Brightness Set

Execute an event when brightness is set.

Color Set

Execute an event when a color is set.

Abilities

The following abilities are available for the RGB LED element when its source element triggers:

Trigger

Trigger the element(s) that follow the RGB LED element.

Set Color to Preset

Set the LED to a preset color.

Set Color (RGB Hex)

Set the LED to a hex value color.

Set Low Brightness

Set the LED’s brightness level to low.

Set Medium Brightness

Set the LED’s brightness level to medium.

Set High Brightness

Set the LED’s brightness level to high.

Turn Off Brightness

Turn off the LEDs brightness setting.

Turn on Red LED

Turn on the hardware’s red LED.

Turn on Green LED

Turn on hardware’s green LED.

Turn on Blue LED

Turn on hardware’s blue LED.

Turn On White LED

Turn on the hardware’s white LED.

Turn Off Red LED

Turn off the hardware’s red LED.

Turn Off Green LED

Turn off the hardware’s green LED.

Toggle Red LED

Toggle the hardware’s red LED.

Toggle Green LED

Toggle the hardware’s green LED.

Toggle Blue LED

Toggle the hardware’s blue LED.

Turn Off LED

Turn off the LED.

---