Seeed Studio Grove Buzzer Element

The Grove buzzer element is used to turn the hardware’s buzzer on or off. This element is for using the Grove Buzzer Sensor.

The Grove buzzer is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the Grove buzzer element:

Name

The name of the element.

GPIO Driver Instance

The GPIO driver instance number to use.

GPIO Pin

The GPIO pin the element is connected to.

Triggers

The following triggers are available to execute events from within the Grove buzzer element:

Triggered

Execute an event when the source element connected to the Grove buzzer triggers.

Buzzer Turned On

Execute an event when the buzzer is turned on.

Buzzer Turned Off

Execute an event when the buzzer is turned off.

Buzzer Beeped

Execute an event when the buzzer is beeped.

Abilities

The following abilities are available for the Grove buzzer element when its source element triggers:

Trigger

Trigger the element(s) that follow the Grove buzzer element.

Turn Buzzer On

Turn on the buzzer.

Turn Buzzer Off

Turn off the buzzer.

Beep Buzzer

Beep the buzzer.

Element Resources

Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove buzzer element.

Demo Projects

To view the Grove buzzer element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.

Name Hardware Description
Grove Button and Buzzer Demo BeagleBone Green Demonstrates using the Grove Button and Buzzer sensors on a BeagleBone Green to beep the buzzer when the button is pressed.
Grove Buzzer Demo BeagleBone Green Demonstrates using the Grove Buzzer Sensor on a BeagleBone Green to beep the buzzer on and off.