Seeed Studio Grove Loudness Element

The Grove loudness element is used to measure sound. This is for using the Seeed Studio Grove Loudness Sensor.

The Grove loudness is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the Grove loudness element:

Name

The name of the element.

ADC Driver Instance

The ADC driver used to communicate with the sensor.

ADC Pin

The device’s ADC pin the element is connected to.

Triggers

The following triggers are available to execute events from within the Grove loudness element:

Triggered

Execute an event when the source element connected to the Grove loudness triggers.

Loudness Read

Execute an event when loudness data is read.

Abilities

The following abilities are available for the Grove loudness element when its source element triggers:

Trigger

Trigger the element(s) that follow the Grove loudness element.

Read Loudness

Read loudness data from the sensor.

Element Resources

Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove loudness element.

Demo Projects

To view the Grove loudness element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.

Name Hardware Description
Arduino Due Loudness Demo Arduino Due Demonstrates using the Grove loudness sensor with an Arduino Due by reading the loudness value and printing it to the debug console.