Seeed Studio Grove PIR Motion Element

The Grove PIR motion element is used to detect motion. This is for using the Seeed Studio Grove PIR Motion Sensor.

The Grove PIR motion is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the Grove PIR motion element:

Name

The name of the element.

GPIO Driver Instance

The GPIO driver instance number to use.

GPIO Pin

The GPIO pin used for detecting motion.

Triggers

The following triggers are available to execute events from within the Grove PIR motion element:

Triggered

Execute an event when the source element connected to the Grove PIR motion triggers.

Motion Detected

Execute an event when motion is detected.

Abilities

The following abilities are available for the Grove PIR motion element when its source element triggers:

Trigger

Trigger the element(s) that follow the Grove PIR motion element.

Detect Motion

Check for the current state of motion detection.

Element Resources

Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove PIR motion element.

Demo Projects

To view the Grove PIR motion element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.

Name Hardware Description
Grove PIR Motion Demo BeagleBone Green Demonstrates using the Grove PIR Motion Sensor on a BeagleBone Green to detect motion. If motion is detected, data will print on a debug console.