Seeed Studio Grove Rotary Angle Element

The Grove rotary angle element is used to read the angle of rotation. This is for using the Seeed Studio Grove Rotary Angle Sensor.

The Grove rotary angle is a sensor element that can be imported into the Element Toolbox through the Add Element Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the Grove rotary angle element:

Name

The name of the element.

ADC Driver Instance

The ADC driver used to communicate with the sensor.

ADC Pin

The ADC pin the element is connected to.

Triggers

The following triggers are available to execute events from within the Grove rotary angle element:

Triggered

Execute an event when the source element connected to the Grove rotary angle triggers.

Angle Read

Execute an event when the angle is read.

Abilities

The following abilities are available for the Grove rotary angle element when its source element triggers:

Trigger

Trigger the element(s) that follow the Grove rotary angle element.

Read Angle

Read the angle in degrees.

Element Resources

Atmosphere includes a selection of resources for users of all levels that demonstrate using the Grove rotary angle element.

Demo Projects

To view the Grove rotary angle element used within a project, click the demo’s name to open the project in Atmosphere and see how the element is set up.

Name Hardware Description
Grove Rotary Angle Sensor Demo BeagleBone Green Demonstrates using the Grove Rotary Angle Sensor on a BeagleBone Green to read the board angle in degrees and send the data to the cloud.