STMicroelectronics LPS22HB Element
The LPS22HB element is used to measure barometric pressure. This element is for using the STMicroelectronics LPS22HB piezoresistive absolute pressure sensor.
The LPS22HB is a sensor element that can be imported into the Element Toolbox through the Add Elementbutton located in the toolbox from Embedded View. ST SensorTile projects have this element imported by default.
The following properties can be changed for the LPS22HB element:
The name of the element.
I2C Driver Instance
The I2C bus used to communicate with the sensor.
The I2C address the element sends data to.
The following triggers are available to execute events from within the LPS22HB element:
Execute an event when the source element connected to the LPS22HB triggers.
Execute an event when pressure data is read.
Execute an event when temperature data is read.
The following abilities are available for the LPS22HB element when its source element triggers:
Trigger the element(s) that follow the LPS22HB element.
Read Pressure (hPa)
Read the sensor’s pressure data.
Read Temperature (°C)
Read the sensor’s temperature data.