STMicroelectronics STTS751 Element

The STTS751 element is used to measure temperature and humidity. This element is for using the STMicroelectronics STTS751 humidity and temperature sensor, which is featured on the X-NUCLEO-IKS01A3 environmental sensor expansion board.

The STTS751 is a sensor element that can be imported into the Element Toolbox through the Add Element button located in the toolbox from the Embedded tab.

Properties

The following properties can be changed for the STTS751 element:

Name

The name of the element.

I2C Driver Instance

The I2C bus used to communicate with the sensor.

I2C Address

The I2C address the element sends data to.

Triggers

The following triggers are available to execute events from within the STTS751 element:

Triggered

Execute an event when the source element connected to the STTS751 triggers.

Temperature Read

Execute an event when temperature data is read.

Abilities

The following abilities are available for the STTS751 element when its source element triggers:

Trigger

Trigger the element(s) that follow the STTS751 element.

Read Temperature (°C)

Read the sensor’s temperature data in Celsius.

---