TE TSD305 Element
The TE TSD305 element is used to read Ambient Temperature and Contactless(IR) Temperature.
SECTION FOR EELS ONLY, uncomment for EELS
The [name] is a sensor element that can be imported into the Element Toolbox through the Add Element
button located in the toolbox from Embedded View.
| Element Icon |
|---|
 |
Properties
The following properties can be changed for the TE TSD305 element:
Name
The name of the element.
I2C Driver Instance
I2C driver instance to use for communication.
GPIO Driver Instance
GPIO driver instance to use.
TE Weather Shield
This sensor is included on the TE Weather Shield, which requires 3 extra GPIO lines to be used as a “chip select”. If this is set to false, the following 3 properties will be ignored.
Weather Shield CSA
Weather Shield Chip Select A GPIO Pin. Ignored if TE Weather Shield property is set to false.
Weather Shield CSB
Weather Shield Chip Select B GPIO Pin. Ignored if TE Weather Shield property is set to false.
Weather Shield En
Weather Shield Chip Select Enable Pin. Ignored if TE Weather Shield property is set to false.
Triggers
The following triggers are available to execute events from within the TE TSD305 element:
Triggered
Execute an event when the source element connected to the TE TSD305 triggers.
Temperature Read
Execute an event when the ambient temperature is read from the TE TSD305.
Object Temperature Read
Execute an event when the contactless IR temperature is read from the TE TSD305.
Abilities
The following abilities are available for the TE TSD305 element when its source element triggers:
Trigger
Trigger the element(s) that follow the TE TSD305 element.
Read Temperature
Read the temperature in degrees Celsius.
Read Object Temperature
Read the contactless IR temperature in degrees Celsius.